Reusable or throw it away – it’s okay.
Economical and green, even for single use
Easy install and removal
Channel
Purpose: To move collected water from downspout or other collector to the street, minimizing erosion and sediment.
How to Install
1. Unpack channel and cut to desired length.
2. Slide foam inserts into pockets and position as- needed with seams down.
3. Cut off excess foam.
4. Upstream end may be folded up and nailed in- place if desired.
5. Hammer spikes through the vinyl and foam sides to anchor in-place.
6. Connect end-to-end if needed with two 6-inch slits in bottom of upstream channel (cut both pockets along the seam and connect with upstream vinyl on top).
Very Green!
Animal friendly
Cleaner streams
Movable and reusable
Diversion
Purpose: To limit collection area of sediment barriers and release clean-ish water to the street. Use below wattle J-hook or silt fence to divert clean water.
How to Install
1. Unpack channel and cut to desired length.
2. Slide foam inserts into pockets and position as- needed with seams down.
3. Cut off excess foam.
4. Place the apron under sediment wattles and trench in or cover upstream edge with 1-inch of dirt.
5. Upstream edge of apron may be secured with nails. Hammer spikes through the vinyl foam pocket and foam if needed to anchor in-place.
6. For use below silt fence cut small weep holes in silt fence fabric to release top water onto clean diversion.
After heavy rains at the construction site, the main problem that arises is to get rid of collected water. Especially in various construction sites, it is essential to keep removing water to prevent erosion and sediments that is why we at Gator Guard supply water diversion products to prevent water from accumulating at the site. Whether you have to remove water collected in your backyard or from the downspout to the street, we have got your back with our water diversion products. All you have to do is to unpack the channel and cut it in the desired length that you require and then slide the foam inserts into the pocket to give it some structure. After you have set it properly, hammer it down to let it anchor in place and you are good to go.
We at Gator Guard provides water diversion barrier for various purposes to minimize erosion and runoff of the soil. If your construction area is near or adjacent to water, this water diversion barrier will help you prevent water from entering your site and help everything run smoothly at the job site. Not only will these water division barriers also help in preventing the sediments from the site to enter the water.